On the off chance that you are not getting fish, the regular tendency is to turn the Black Box up to a higher voltage. Frequently this is the incorrect way. More often than not you need to diminish the regular electrolysis voltage for best outcomes.
Here and there you can tell on the off chance that you have the Black Box voltage excessively high by watching snared fish as you reel them close to the vessel. In the event that your voltage is excessively high, they will battle fiercely and will attempt to swim under the vessel and into the prop wash where the voltage is lower.
Bigger fish need less voltage than littler fish. Their huge body size makes them progressively delicate to the electric charge. For enormous fish (more than 20 or 30 pounds) you might need to turn the voltage down around .1 volt. You ought to likewise bring down the voltage for additional delicate fish like sharks. Note: As you dial the Black Box, it will demonstrate readings down to zero.
As you are scanning for the best voltage, make little modifications. Regularly, a little change is all that is expected to draw in the fish you are after.
On the off chance that you are running more than one downrigger, it is ideal to snare every one of them to the Black Box to abstain from having various voltages on each downrigger. By interfacing the majority of the downriggers together, it makes a uniform positive charge around the whole structure which is profoundly attractive. The Black Box has the ability to keep running up to six downriggers.
Various inquiries emerge on the best way to alter the Black Box as you fish further. There is less misfortune than you may speculate as you go 50, 100 or even 200 feet down. Each area of downrigger link is responding independently with the vessel’s frame and its zinc, in this manner making its own common voltage through the procedure of electrolysis. Utilizing protected wire, we have estimated this voltage as profound as 400 feet and found next to no adjustment in the charge produced. The Black Box is changing and controlling your rate of characteristic electrolysis to the setting you want. This will convey directly down the wire in both crisp and saltwater.